on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
[HDMI Audio]: Set the HDMI audio
•
output from your TV, or disable HDMI
audio output from the TV.
•
[Audio sync]: Set audio delay if audio
and video cannot be matched.
•
[Auto speaker setup (recommended)]:
Automatically set up speakers for best
surround sound experience.
Parental control settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Change Password]: Set or change
•
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
[Parental control]: Restrict access
•
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].
Display settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Auto subtitle shift]: Enable or disable
•
automatic repositioning of subtitles on
TVs that support this feature.
[Display panel]: Set the brightness of
•
the home theater front panel display.
[VCD PBC]: Enable or disable the
•
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.
Energy saving settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Screen saver]: Switch the home
theater to screen saver mode after 10
minutes of inactivity.
[Auto standby]: Switch the home
•
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
•
[Sleep timer]: Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
[Fast wake up]: Select [On] to enable
•
fast wake up of your home theater.
Note
•
If the fast wake up feature is not available on your
home theater, upgrade to the latest software to have
this feature. (see 'Update software' on page 36)
Speaker settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Enhanced audio]: Select [On] to
enable audio post processing at the
EN
34