Easylink - Philips HTS4561/12 User Manual

2
Insert the SD memory card into the SD
CARD slot on your home theater.
3
Follow the onscreen instructions to format
the card.
» Any content on the card is erased during
formatting.
4
After formatting, leave the card in the SD
CARD slot.
Rent and play online video
1
Connect your home theater to the home
network and internet (see 'Computers and
the Internet' on page 17).
2
Press (Home).
3
Select [browse Net TV], and then press
OK.
» The online services available in your
country are displayed.
4
Press the Navigation buttons to go to a
video store, and then press OK.
5
If prompted, follow the video store
instructions to register or log in to an
account.
» You see an option to rent videos.
» If you have rented videos and are still
within the rental period, you also see an
option to watch the videos.
6
Follow the video store instructions to rent
or watch a video.
•
The video is downloaded to your SD
memory card. You can watch it now or
at any time within the rental period.
•
When you have downloaded a video
to your card, you can watch it only on
your home theater. You can't move the
card and watch it on another device.
•
If you move the card and format it
in another device, your downloaded
video is erased. Download your video
again before you watch.
7
Press the play buttons on your remote
control to play, pause, search, or stop the
video.

EasyLink

The home theater supports Philips EasyLink, which
uses the HDMI-CEC (Consumer Electronics
Control) protocol. EasyLink-compliant devices that
are connected through HDMI can be controlled
by a single remote control.
Philips does not guarantee 100% interoperability
with all HDMI-CEC devices.
What you need
•
HDMI-CEC compliant devices.
•
An HDMI connection between the
connected devices.
Switch on
1
On the TV and other connected devices,
turn on the HDMI-CEC operations. For
details, see the manual of the TV or other
devices.
2
Press (Home).
3
Select [Setup], and then press OK.
4
Select [EasyLink] > [EasyLink], and then
press OK.
5
Select [On], and then press OK.
Control devices
Control the home theater and the other
connected HDMI-CEC compliant devices with a
single remote control.
EN
33