Picture and video settings
1
SETUP .
Press
2
Select [Video Setup] and then press OK .
[TV System] : Select a video format
•
supported by the TV.
[TV Display] : Select a picture format to
•
fi t the TV screen.
[HDMI Setup] : [Wide Screen Format] : For
•
16:9 wide screen TV display setting. [HDMI
Video] : Select the resolution of the video
signal being output from the HDMI OUT.
[Picture Settings] : Select color settings
•
for the video display on TV.
[HD JPEG] : Enable or disable high
•
defi nition picture display.
Note
•
If you change a setting, make sure that the TV
supports the new setting.
Audio settings
1
SETUP .
Press
2
Select [Audio Setup] and then press OK .
[HDMI Audio] : HDMI audio is
•
automatically down-mixed to two
channel for TV speakers. If you do not
want to output audio through your TV,
disable the HDMI audio.
Parental control settings
Password and Ratings
1
SETUP .
Press
2
Select [Preference Setup] and then press OK .
[Password] : Set or change your password
•
for parental control access. If you do not
have a password or have forgotten your
password, enter 0000 .
[Parental] : Enable maturity-based restricted
•
access for playback of DVD-video that
are recorded with ratings. To play discs
irrespective of the rating, select [8 Adult] .
EN
14
Lock disc
1
SETUP .
Press
2
Select [General Setup] and then press OK .
[Disc Lock] : Lock the disc to restrict
•
play. You can lock up to 20 discs on your
home theater.
Note
•
To play a locked disc, follow the onscreen
instructions to enter the password, and then
press OK .
Display settings
1
SETUP .
Press
2
Select [Preference Setup] and then press OK .
[PBC] : Enable or disable the content
•
menu navigation of VCD and SVCD discs
with Play Back Control feature.
[MP3/JPEG Display] : Select the content
•
display for MP3/JPEG fi les.
Energy saving settings
1
SETUP .
Press
2
Select [General Setup] and then press OK .
[Screen Saver] : Switch the home theater
•
to screen saver mode after 10 minutes of
no activity.
[Auto Standby] : Switch the home theater
•
to standby mode after 30 minutes of no
activity when in disc or USB mode.
[Sleep Timer] : Switch the home theater
•
to standby mode after the elapsed time.
[Display Dim] : Set the brightness of the
•
home theater front panel display.
Restore default settings
1
SETUP .
Press
2
Select [Preference Setup] > [Default] , and
then press OK .
3
Select [Reset] and then press OK to confi rm.
» Your home theater is reset to its default
settings, except for parental control setting.