Mp3 Player; Ipod Or Iphone - Philips HTS4561/12 User Manual

Tune stations
1
Connect the FM antenna as described in the
quick start guide.
2
Press SOURCE repeatedly until RADIO
appears on the display panel.
» If you have already installed the radio
stations, the last channel that you listened
to is played.
» If you have not installed any radio
stations, the message AUTO INSTALL...
PRESS PLAY appears on the display
panel. Press
3
Press the following buttons to listen or to
change radio stations:
Button Action
/ or Select a preset radio station.
Alphanumeric
buttons
Navigation
Search for a radio station.
buttons (left/
right)
Navigation Fine tune a radio frequency.
buttons (up/
down)
Press to stop the installation of
radio stations.
BACK Press and hold to erase the
preset radio station.
OPTIONS Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Listen to radio
1
Press SOURCE repeatedly until RADIO
appears on the display panel.
•
To listen to a preset station, press
or .
•
To search for a radio station, and then
listen, press Navigation buttons (left/
right).
2
Press +/- (Volume) to change the volume.
EN
26
(Play).
Tuning grid
In some countries, you can toggle the FM tuning
grid between 50 kHz and 100 kHz. Switching the
tuning grid erases all preset radio stations.
1
Press SOURCE repeatedly until RADIO
appears on the display panel.
2
Press .
3
Press and hold
50 kHz or 100 kHz.

MP3 player

Connect your MP3 player to play your audio files
or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
Play music
1
Connect the MP3 player to the home
theater as described in the quick start guide.
2
Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files or music.

iPod or iPhone

When you connect a Philips dock for iPod/iPhone,
you can use the home theater to play music,
movies and photos from your iPod or iPhone.
What you need
•
A Philips dock (Model: Philips DCK3060/
DCK3061).
•
A yellow composite cable.
Note
•
Charge your iPod/iPhone on the dock while
the home theater is in iPod mode.
(Play) to toggle between