Installation - KEKAI KT3000 Instruction Manual

1. Installation

Before the installation, the following matters need your attention.
1. Products should be put down gently.
2. Installation in acidic and alkaline environments is not recommended.
3. The product must be earthed.
4. The products are required to check the product brand mark on the voltage
and the local voltage whether conform.
5. Ensure the power rating should have sufficient current carrying capacity.
2. Ensure the production's installation site
For safe use of the product, the product installation position should have a
minimum height of 1.8 m from the ground, and a minimum distance of 0.5 m
from ceiling, roof and both sides walls.
3.Installation steps
I. According to where the product
installation location is, use a power
drill to make four 8 mm round holes.