KEKAI KT3000 Instruction Manual page 13

repair the unit yourself will void your warranty.
- If the mains cable is damaged it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
- Do not handle the element with bare hands. If it is inadvertently touched,
remove finger marks with a soft cloth and methylated spirits or alcohol,
otherwise the marks will burn into the element causing premature heater
failure.
- Do not replace or attempt to replace the element in this product.
- This product is suitable for indoor and outdoor use. Do not operate the
appliance in direct sunlight, near heat sources, humid environments or in
places near water or other liquids such as bathrooms, shower or
swimming pool.
- This product must not be left outdoors exposed to the elements for long
periods of time.
- Do not operate with wet hands or spill water or other liquids on to the
appliance the mains cable or plug.
- Do not run the power cable under carpeting. Do not cover the power cable
with rugs, runner, or similar coverings. Arrange the power cable away from
foot traffic and where it will not be tripped over.
- Do not wind the power cable around the unit.
- Do not insert or allow foreign objects to enter any ventilation or opening on
the heater, as this may result in electric shock, fire, or damage to the
heater.
- To prevent a possible fire, do not block the air vents.
- Do not use the appliance in areas where petrol, paints or other flammable
substances are used or stored.
- Always position the appliance with the mains plug in an accessible position
and avoid the use of an extension cables as they may overheat and create
a potential fire risk.
- Always ensure the heater is plugged into a suitable socket, one that is
tested for outdoor use.
- To disconnect heater, turn controls to OFF, then remove plug from socket.
Do not unplug by pulling on the power cable.
- Always unplug the unit and ensure the unit is completely cold before
moving, cleaning or storing.