Installation - KEKAI Tornado Instruction Manual

27. Parts of the heater may exceed 200 , contact with the heating tube, refl ector, or metal parts near the heating tube,
may cause severe BURNS . To avoid burns, do not let bare skin touch hot surface.
28. NEVER place hands under the heating elements. ALWAYS allow heating element to cool at least 10 minutes before
touching the heating tube or adjacent parts.
29. This product contains recyclable materials. Do not dispose this product as unsorted municipal waste. Please con-
tact your local municipality for the nearest collection point.
SAVE THESE INSTRUCTIONS
Introduction
The SUNDEAR TORNADO carbon infrared heaters produce instant and comfortable heat like the sun. These robust and
weatherproof heaters are designed for domestic and commercial heating applications within indoor and outdoor areas.
Model Tornado
Voltage (VAC) 220-240vVAC
Wattage(W) 1500/2000 W
Hertz(Hz) 50-60 Hz
Waterproof IPX5

INSTALLATION

1. This heater should be installed by a competent person, i.e. a qualifi ed electrician.
2. Always disconnected the heater from the electricity supply and allow it to cool before installation.
3. Keep the supply cord away from the body of the heater which will get hot during use.
4. If the heater is to be used outside, a weatherproof outlet is recommended.
5. Fasten the heater securely on the base plate using the screws supplied.