Assembling - Flex Arm - tagarno FHD ZAP Manual

6. ASSEMBLING - FLEX ARM

ASSEMBLING | FLEXARM (1/2)
Mount the table mount using the table clam. Assemble the bottom
of the flex arm and the table mount.
NB: For maximum stability at all magnfication levels, make sure to
mount the microscope on a sturdy table.
Assemble the flex arm by slotting the two arms together.
TIP!
Find the "How to Install" tutorial video here:
www.tagarno.com/installzap
Mount the microscope to the top of the flex arm using the vesa
bracket, screws and handles.
Press the cables into place in the slot on the flex arm and secure
them by screwing the cable holder into place on top.
4