The Display - AGFA Drystar 5301 User Manual

The display

The touchscreen has a text display. We distinguish two display types
depending on the selected language:
• a text display with 4 lines for Western languages (e.g. Dutch, French,
Portuguese, Swedish, ...).
• a text display with 2 lines for all other languages (e.g. Greek, Chinese,
Korean, Polish,...).
Whether a display is translated or not depends on the operating mode.
Topics:
• General display features
• Operator mode
• Key-operator mode
• Data entry
5 Restore config.
5 Restore config.
6 Calibration
6 Calibration
7 Service Actions
7 Service Actions
General display features
8 Quality Control
8 Quality Control
9 Installation
9 Installation
The figure below shows how the display is illustrated in this manual:
5 Restore config.
6 Calibration
7 Service Actions
8 Quality Control
9 Installation
The visible display lines are indicated in the upper zone. The other possible
lines are shown in the lower zone and can be reached by scrolling using the
Up/Down arrow keys on the Keypad.
In the upper right corner, the current printer status is displayed:
• In Operator mode, two characters display the print queue status.
• In Key-operator mode, two characters are displayed in reverse video to
indicate the current menu- or submenu level (e.g. 'KO' for Key-operator
main level).
• A warning, an error or a maintenance request is displayed respectively
with the character W, E and M.
Related Links
Managing the print queue
Drystar 5301, Drystar 5302 | Introduction | 65
Visible
Visible
Reachable with Up/Down arrow keys
Reachable with Up/Down arrow keys
Visible
Reachable with Up/Down arrow keys
on page 73
2831F EN 20210601 1655