Advertisement
Turn off power
at the breaker.
This is essential to
keeping you and your
new Ring Doorbell safe.
If you're not sure which
breaker controls your
doorbell chime, turn off the
master breaker for your home,
or contact an electrician.
CAUTION!
You'll be working with electrical
wires during the install process.
If you are uncomfortable or
inexperienced with doing so,
consult with a licensed electrician.
4
Grab the included
Jumper Cable.
The Jumper Cable bypasses
and disables your existing
doorbell chime, and must be
installed before you install
your Ring Doorbell.
Your Doorbell Wired is
compatible with doorbell
systems supplying 10–24
volts AC, at 50 or 60Hz, 40VA
max. The AC connector is
the class 2 energy source.
5
Advertisement
