Advertisement
Quick Links
Advertisement
Related Manuals for ring Doorbell Pro 2
Summary of Contents for ring Doorbell Pro 2
- Page 1 User Guide Doorbell Pro 2...
- Page 2 The Ring App walks you through setting up and managing your Ring Doorbell. (2) 1-3/8" Long Mounting Screws Search for “Ring” in one of the app stores below, or visit ring.com/app (2) Wall Anchors (2) 3/16" Security Screws Set up your Ring Doorbell.
- Page 3 Turn off power at the breaker. Grab the included Pro Power Kit. This is essential to keeping you and You must install this in your your new Ring Doorbell safe. doorbell chime. It’s not a transformer or power adapter. If you’re not sure which breaker...
- Page 4 Remove the cover from your Connect the Pro Power Kit wires. doorbell chime. Connect one wire from the Pro After you’ve turned off power at Power Kit to the “Front” terminal, the breaker, remove the cover from and the other to the “Trans” your chime and set it aside for now.
- Page 5 Remove the faceplate. Corner Mount (fig 1). Grasp the bottom of the faceplate If you are replacing a Ring Doorbell, and pull to remove. align the two small screw holes with two of the existing holes in your wall (fig 2).
- Page 6 (fig. 4). siding, you can skip this step.) fig. 3 fig. 4 1-3/8" Long 5/8" Short mounting mounting screw screw DO NOT USE any screw other than the 3/16" included long mounting screws when Security securing your Ring Doorbell. screw...
- Page 7 Corner Mount. Loop one doorbell wire around each of the screw terminals on the Secure your Ring Doorbell to rear of your Ring Doorbell then the Corner Mount with the two tighten the terminals to secure. included short mounting screws.
- Page 8 Mark the screw holes. Using your Ring Doorbell as a DO NOT USE any screw other than the template, mark the location of the included short mounting screws when two mounting holes on your wall. securing your Ring Doorbell. 5/8" Short 1-3/8"...
- Page 9 On stucco, brick, or concrete, use each of the screw terminals on the a 1/4" masonry bit to drill holes in rear of your Ring Doorbell then your wall, then insert the included tighten the terminals to secure. wall anchors.
- Page 10 Screw in your Ring Doorbell. Restore power at the breaker. Mount your Ring Doorbell It may take a moment for your with the two included long Ring Doorbell to power on. mounting screws. You’ll know it’s ready once it lights up and speaks to you.
- Page 11 Re-attach the faceplate, then use the included screwdriver to drive Your new device comes with a free the small security screw into the 30-day trial of Ring Protect video bottom of your Ring Doorbell. recording service. To continue your subscription and save your videos, please visit ring.com/protect-plans...
- Page 12 For information on our warranty, theft protection, and Ring Protect Plans, see ring.com/legal © 2020 Ring LLC or its affiliates. *$5 CAD per month or $50 CAD per year Ring and all related marks are trademarks **$15 CAD per month or $150 CAD per year...
- Page 13 XX-XXXXXX-XX...