Advertisement
For information on our warranty, theft protection,
and Ring Protect Plans, see ring.com/
legal
For Consumers
in
the USA
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
NOTE:
This equipment has been tested and
found to comply with the limits
for
a Class B dig-
ital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
res·
idential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the
interfer-
ence by one or more of the following measures:
,
Reorient
or relocate the receiving antenna
,
Increase the separation between
the equipment and receiver.
,
Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
,
Consult
the dealer or an experienced
radio/TV technician for help.
Pursuant to Section 15.21 of the FCC rules, changes
or modifications to a Product by the user that are
not expressly approved by the pa~ responsible
for compliance could void the users authority to
operate the equipment
The device meets the FCC Radio Frequency Emis-
sion Guidelines. Information on the product Is on
file with the FCC and can be found by inputting
such Product's FCC ID (which can be found on the
device) into the FCC ID Search form available at
fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is:
Ring LLC, 1523 26th St, Santa Monica, CA USA,
90404
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment
and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and
operated in accordance with provided instruc-
tions and the antenna(s) used for this transmitter
must be installed to provide a separation distance
of at least 20 cm from all persons and must not
be co-located or operating in conjunction with
any other antenna or transmitter. End-users and
installers must be provided with antenna instal-
lation instructions and consider removing the
no-collocation statement.
For Consumers in Canada
This device contains licence-exempt transmit-
ter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada's
licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may cause
undesired operation of the device.
Information
Regarding
Exposure to
Radio
Frequency Energy
This equipment complies with IC RSS-102 RF
exposure limits set forth for an uncontrolled
environment.
Radio Frequency Compliance
In order to protect human health, this device
meets the thresholds for exposure of the gen·
eral public to electromagnetic fields according
to Council Recommendation 1999/519/EC.
This transmitter must not be co-located or oper·
ating in conjunction with any other antenna or
transmitter. This equipment should be installed
and operated with a minimum distance of 20 cen-
timeters between the radiator and your body.Your
Ring Video Doorbell Wired is designed to replace
an existing doorbell button, and gets its power
from the doorbell system.
•
ring
1523 26th
St.
Santa Monica, CA 90404
Q
2020 Ring LLC or its affiliates.
Ring and all related marks are trademarks
of Ring LLC or its affiliates.
22-002713-02
Advertisement
