Naming Station Presets; Listening To Station Presets - Pioneer VSX-D514 Operating Instructions Manual

07 Using the tuner
4 Press CLASS to select one of the three
classes then press } and ] to select the
station preset you want.
You can also use the the MULTI JOG dial (front
panel) to select a station preset.
5 Press ENTER.
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the station.

Naming station presets

For easier identification, you can name your
station presets.
1 Choose the station preset you want to
name.
See Listening to station presets (this page) for
how to do this.
2 If you're using the remote control,
press RECEIVER.
3 Press TUNER EDIT.
The display shows ST. NAME, then a blinking
cursor at the first character position.
4 Input the name you want.
Names can be up to four characters long.
• Use the front panel MULTI JOG dial or the
remote control } and ] buttons to select
characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
• The name is stored when ENTER is
pressed after choosing the fourth character.
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of a
name.
40
En
• Once you have named a station preset, you
can press DISPLAY when listening to a
station to switch the display between the
name and the frequency (this will also display
the different types of RDS information
available – see the next page for more on
this).

Listening to station presets

Having stored up to 30 stations (see previous
page), preset stations can be easily recalled.
1 Press the AM or FM button to select the
tuner.
2 Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3 Press STATION +/– to select the station
preset you want.
• If the receiver is left disconnected from the
AC power outlet for an extended period, the
station memories will be lost and will have to
be reprogrammed.