03
Connecting up
Connecting DVD 5.1 channel components
If you prefer to use a seperate component for decoding DVDs, you can connect a decoder or a DVD
player with multi-channel analog outputs to the multi-channel inputs of this receiver.
When connecting your equipment, always make sure the power is turned off and the power cord is
disconnected from the wall outlet.
The 5.1 channel input can only be used when DVD 5.1 ch is selected (see page 30).
Connecting video components
Connect your video components to the jacks as shown below. Regarding digital video components
(like a DVD player), you must use the connections pictured on this page for the video signal, but in
order to hear a digital source (like a DVD) you should hook up the audio to a digital input (see
previous page). It is also a good idea to hook up your digital components with analog audio
connections (see previous page and below).
When connecting your equipment always make sure the power is turned off and the power cord is
disconnected from the wall outlet.
14
En
CENTER
OUTPUT
SUBWOOFER
OUTPUT
SURROUND
OUTPUT
DVD/multi-channel decoder
with 5.1 channel analog
VIDEO
output jacks
OUTPUT
FRONT
OUTPUT
AUDIO
INPUT
VIDEO
INPUT
VIDEO
OUTPUT
DVD recorder/
AUDIO
Video deck
OUTPUT
The arrows
indicate the
direction of
the signal.
The arrows
indicate the
direction of
the signal.