HAMPTON BAY 131-012-CLCB-KD Use And Care Manual page 6

Assembly (continued)
3
Attaching the wheels
□
Attach 1 wheel (F) to the axle (G) with 1 sleeve (JJ),
1 washer (EE) , 1 bolt (AA) and 1 end cap (KK) at each end,
using hex wrench.
IMPORTANT: Please do not tighten bolts completely now.
E
G
JJ
5
Attaching the bolt caps and the cushion
□
Attaching bolt caps (FF) and nut caps (GG) to cover all exposed
bolt heads and nuts.
□
Place cushion onto the chaise lounge and tie it to the frame.
□
Level the chaise lounge with glides at the bottom of
middle legs and front legs.
F
FF
4
Attaching the back
□
Attach the back (A) to the seat (B) with 1 nut (II), 1 washer (EE),
1 end cap (HH) and 1 bolt (DD) on each side, using two wrenches.
EE
AA
KK
FF
6
DD
HH
EE
II
FF
GG