Using The Nutri Ninja Cups - Ninja BL682ANZMN Owner's Manual

USING THE NUTRI NINJA CUPS

IMPORTANT: Review all warnings on
pages 4–6 before proceeding.
IMPORTANT: When processing soft dry
ingredients such as day-old bread or
cheese use quick, short 1 second pulses.
Do not overfill to avoid overheating the
appliance. Allow the appliance to cool
after each use.
NOTE: Nutri Ninja | Ninja Blender Duo with
Auto-iQ Technology can sense which jar is
on the motor base. The available function
lights will illuminate depending on which jar
is placed on the motor base.
1 Place the motor base on a clean, dry, level
surface such as a counter or tabletop.
Press down on the motor base to make
sure that the suction cups adhere to the
counter or tabletop.
2 Add ingredients to the Nutri Ninja Cup.
or or
3 Place the Pro Extractor Blades Assembly
onto the cup and tightly screw it on
clockwise until you have a good seal.
16 AU 02 8801 7666 | NZ 0800 112 660
4 Turn the Nutri Ninja Cup upside down
and place it onto the motor base, aligning
the tabs on the cup with the motor base.
Rotate the Nutri Ninja Cup clockwise
until it locks in place, you will hear a click
when the lock is engaged.
5 Press the power button on, and select
the speed or Auto-iQ program that suits
your needs. The Auto-iQ program will
stop the appliance automatically at the
end of the program.
6 To pause the appliance, press the
selected speed or Auto-iQ program
a second time. When the program is
paused, the light on the program button
will flash until you press it again to
resume the rest of the program.
7 Once you have reached your desired
consistency, stop the appliance by
pressing the power button and wait
for the Pro Extractor Blades Assembly
to stop turning. Turn the Nutri Ninja
Cup anticlockwise and pull straight up
to remove.
NOTE: Do not overfill. To avoid spilling, do
not add ingredients past the MAX fill line.
or or
8 Turn the cup upright and remove the
Pro Extractor Blades Assembly by
twisting the Pro Extractor Blades
Assembly anticlockwise.
9 Do not store blended contents with the
Pro Extractor Blades attached attached.
10 Place the Sip & Seal Lid or the spout lid
onto the Nutri Ninja Cup, twist to seal
and enjoy.
11 Do not store blended contents with the
Pro Extractor Blades attached attached.
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
12 Place the Sip & Seal Lid or the spout lid
onto the Nutri Ninja Cup, twist to seal
and enjoy.
13 For storage, use Sip & Seal Lid or spout
lid to cover.
14 Be sure to store the Pro Extractor Blades
attached to an empty cup when not in use.
15 Make sure that the motor base is
unplugged when not in use.
16 To release the motor base from the counter
or tabletop, place your hands underneath
both sides of the motor base and gently
pull the unit up and towards you.
17