Table of Contents
Advertisement
Assembly and Use for the Nutri Ninja
WARNING: Handle the Nutri Ninja Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Nutri Ninja Blade Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
ASSEMBLY
Fig. 2
Fig. 3
NOTE: Nutri Ninja
| Ninja
®
Technology can sense which jar is on the motor base. The
function lights will illuminate depending on which jar is
placed on the motor base. (Fig. 1)
1
Review warning and caution statements above before
proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3
Add ingredients to the Nutri Ninja
4
Place the Pro Extractor Blades
and tightly screw it on clockwise until you have a good
seal. (Fig. 2)
5
Turn the Nutri Ninja
cup upside down and place it onto
®
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja
it locks in place, you will hear a click when the lock is
engaged. (Fig. 3)
6
Press the power button on, and select the speed or
Auto-iQ
program that suits your needs. The Auto-iQ
™
program will stop the appliance automatically at the end
of the program. (Fig. 4)
12
1-877-646-5288
Blender System with Auto-iQ
®
cup.
®
Assembly onto the cup
®
cup clockwise until
®
Cups
®
USE
Fig. 1
Fig. 4
7
To pause the appliance, press the selected speed or
™
Auto-iQ
Program a second time.
™
8
Once you have reached your desired consistency,
turn the power button off. Turn the Nutri Ninja
cup counter-clockwise and pull straight up to remove.
(Fig. 5, Fig. 6)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the "Max Liquid" line.
9
Turn the cup upright and remove the Pro Extractor
Blades
Assembly by twisting the blade assembly
®
counterclockwise.
10 Place the Sip & Seal
twist to seal and enjoy!
11 Make sure that the motor base is unplugged when not
in use.
12 To release the motor base
from the counter or table top,
place your hands underneath
both sides of the motor base
and gently pull the unit up and
towards you. (Fig. 7)
™
REMOVAL
Fig. 5
®
lid onto the Nutri Ninja
®
®
Fig. 6
cup,
Fig. 7
Advertisement
Table of Contents
