Use Of The Nutri Ninja Cups - Ninja BL450 Series Owner's Manual

Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
CAUTION: Do not blend hot liquids.
Allow liquids and foods to cool to room
temperature before blending.
CAUTION: Blades are sharp! Use extreme
caution when handling the blade
assemblies. Always hold them by the base of
the blade assembly.
CAUTION: Never remove the container while
the appliance is still running.
CAUTION: We do not recommend grinding in
any of our Nutri Ninja Cups.
®
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
8 1-877-646-5288
CAUTION: Blade assemblies are sharp and
removable, handle with care. When handling the
blade assemblies, do not hold the blades, always
hold by the base of the blade assembly.
1 Remove all packaging material and labels from
the appliance.
2 Wash the lids, cups, and attachments in warm, soapy
water with a soft cloth.
CAUTION: Handle the blade assemblies with care
when washing as the blades are very sharp.
3 Rinse and dry thoroughly.
NOTE: The Stainless Steel Ninja Cup is NOT
dishwasher safe.
4 Cups, lids, and attachments are all dishwasher safe.
It is recommended that the lids and attachments be
placed on the top rack. Ensure that the attachments
are removed from the cups before placing in the
dishwasher.
5
Wipe the motor base clean with a damp cloth.
Use of the Nutri Ninja Cups
®
WARNING: Never leave the appliance unattended while in use.
CAUTION: Pro Extractor Blades are sharp and removable, handle with care. When handling the Pro
™
Extractor Blades, do not hold the blades, always hold by the base of the blade assembly.
CAUTION: CAUTION: DO NOT BLEND HOT LIQUIDS. Allow the liquids and foods to cool to room temperature
before blending.
IMPORTANT: Make sure that the motor base is plugged in for use.
IMPORTANT: When processing soft dry ingredients such as day-old bread or cheese use quick, short 1 second
pulses. Do not overfill to avoid overheating the appliance. Allow the appliance to cool after each use.
ASSEMBLY
or or
Fig. 1 Fig. 2
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Make sure that the motor base is plugged in for use.
3
Add ingredients to the cup.
NOTE: Do not overfill! to avoid spilling, do not add
ingredients past the "MAX" fill line.
4 Place the Pro Extractor Blades onto the cup and twist it
on tightly until you have a good seal. (Fig. 1)
5 Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use. (Fig. 2)
6
Press down on the top of the cup in short intervals to
activate. (Fig. 3)
USE REMOVAL
Fig. 3 Fig. 4
7 When you have reached your desired consistency, stop
the appliance by removing your hand from the cup.
8 To remove the cup, ensure that the motor has stopped
running. Then turn the cup anticlockwise (Fig. 4) and
pull straight up to remove. (Fig. 5)
9 Turn the cup upright and remove the Pro Extractor
Blades by twisting the Pro Extractor Blades
anticlockwise. Be sure to store the Pro Extractor Blades
attached to an empty cup when not in use.
10 Twist the Sip & Seal
® lid onto the cup to enjoy your
drink on the go. Press flip top cap firmly into the
opening to get the best seal. The flip top cap locks open
when pressed backward.
11 Make sure that the motor base is unplugged when not
in use.
www.sharkninjamanuals.com
Fig. 5
9