Ninja BL682ANZMN Owner's Manual page 6

USING THE NINJA® BLENDER – CONT�
9 Holding the lid by the handle in the
upright position, place it on top of the
pitcher aligning the triangle located
on the lid with the triangle located on
the pitcher's handle. Press the handle
down until you hear a click. The triangles
on the lid and the blender handle MUST
be aligned in order for the blender to
turn on.
10 Plug the power cord into the electrical
outlet and press the power button ( ).
IMPORTANT: As a safety feature, the
power light will flash and the motor
will not work if the pitcher and lid are
not installed correctly. When the pitcher
and lid are installed properly, the power
light will be solid, indicating that the
appliance is ready for use.
NOTE: Nutri Ninja | Ninja Blender System
with Auto-iQ Technology can sense
which jar is on the motor base. The
available function lights will illuminate
depending on which jar is placed on the
motor base.
11 Review warning and caution statements
at the top of page 4 before proceeding
to number 12.
10 AU 02 8801 7666 | NZ 0800 112 660
12 Press the power button to turn on
the unit. Select the speed or Auto-iQ
program that best suits your needs. The
Auto-iQ program will stop the appliance
automatically at the end of the program.
NOTE: Pulse ingredients for even chopping
by holding the Auto-iQ PULSE button until
your desired consistency is reached.
NOTE: Max PULSE iteration is 30 pulses.
After 30 pulses allow 10 minutes to pass
before running the PULSE function up to
an additional 30 pulses.
13 To pause the appliance, press the
selected speed or Auto-iQ program
a second time. When the program is
paused, the light on the program button
will flash until you press it again to
resume the rest of the program.
14 When you have reached your desired
consistency, stop the appliance by pressing
the power button and wait for the
Stacked Blade Assembly to stop turning.
15 Turn the pitcher anticlockwise to remove
and then lift off the base.
CAUTION: Never insert your hands in the
pitcher as the blades are sharp. Always
use a spatula to dislodge food that has
stuck to the sides of the pitcher.
16 Open the pour spout cap and use the
spout to empty liquid contents.
17 For thicker consistencies, first remove
the lid by pressing the release button
and pulling the lid handle up to a 90
degree angle to lift lid off the pitcher.
Then, carefully remove the Stacked Blade
Assembly by the top of the shaft. Place
Stacked Blade Assembly away from the
work area to avoid accidental contact.
Finally, empty contents from the pitcher.
AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
18 Make sure that the unit is unplugged
when not in use.
19 To release the motor base from the counter
or tabletop, place your hands underneath
both sides of the motor base and gently
pull the unit up and towards you.
11