Assembly And Use For The Nutri Ninja Cups - Ninja BL642EU Owner's Manual

Assembly and Use for the Ninja
®
Fig. 6
USE
Fig. 7 Fig. 8
NOTE: Nutri Ninja | Ninja Blender with
® ®
Auto-iQ Technology can sense which jar is on the motor
®
base. The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
11 Review warning and caution statements at the top of page 37
before proceeding to number 12.
12 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
NOTE: Max PULSE iteration is 30 Pulses. After 30
Pulses allow 10 minutes to pass before running the
PULSE function up to an additional 30 Pulses.
13 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
14 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and wait
for the Stacked Blade Assembly to stop turning. (Fig. 8)
38
Blender - cont.
REMOVAL
Fig. 9 Fig. 10 Fig. 11
15 Turn the pitcher anticlockwise to remove and then lift
off the base. (Fig. 9)
CAUTION: Never insert your hands in the pitcher as the
blades are sharp. Always use a spatula to dislodge
food that has stuck to the sides of the pitcher.
16 Open the pour spout cap and use the spout to empty
liquid contents.
17 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
18 Make sure that the unit is unplugged when not in use.
19 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 11)
Assembly and Use for the Nutri Ninja
WARNING: Handle the Pro Extractor Blades
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the Nutri Ninja cup upon completion of
blending. Do not store ingredients before or after blending them in the cup with the blade assembly
attached. Some foods may contain active ingredients or release gases that will expand if left in a sealed
container, resulting in excessive pressure buildup that can pose a risk of injury. For ingredient storage in
the cup, use only Sip & Seal Lid or Spout Lid to cover.
Fig. 1
IMPORTANT: When processing soft dry
ingredients such as day-old bread or cheese
use quick, short 1 second pulses. Do not overfill
to avoid overheating the appliance. Allow the
appliance to cool after each use.
NOTE: Nutri Ninja | Ninja Blender Duo with Auto-iQ
®
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 1)
1 Review warning and caution statements above
before proceeding to number 2.
2
Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
Cups
®
Assembly with care, as the blades are sharp.
™
ASSEMBLY
or or
Fig. 3
Fig. 2
3
Add ingredients to the Nutri Ninja cup.
4 Place the Pro Extractor Blades Assembly onto the cup
and tightly screw it on clockwise until you have a good
seal. (Fig. 2)
5
Turn the Nutri Ninja cup upside down and place it onto
®
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja cup clockwise until
it locks in place, you will hear a click when the lock is
engaged. (Fig. 3)
www.ninjakitchen.eu 39