Table of Contents
Advertisement
1.
Hold the overflow container with one hand and un-
screw it with the other hand.
Hold the overflow container level to prevent liquid
‒
from leaking out.
18 FAQs
18.1 Using the appliance
Question
Why can I not switch on the
hob and why is the child-
proof lock symbol lit?
Why are the illuminated dis-
plays flashing and why is a
signal sounding?
The ventilation system does
not switch on even though
the automatic start is activ-
ated.
The ventilation system con-
tinues to run even though
the cooking zones have
been switched off.
The air intake is too weak.
Answer
¡ The childproof lock is activated. You can find further information about this func-
tion under
→ "Childproof lock", Page 12.
¡ Clean the surface of the control panel of any liquids or food residue. Remove any
objects that may cover the control panel.
You can find further information about deactivating the signal tone under
→ "Basic settings", Page 12.
¡ Manually activate the ventilation system or check the configuration of the auto-
matic start. You can find additional information about this in the section entitled
→ "Basic settings", Page 12.
¡ Manually switch off the ventilation system.
You can find additional information about this setting in the section entitled
→ "Basic operation", Page 9.
¡ Ensure that the grease filter is clean.
To find out how to clean and replace the filter, refer to the section entitled
→ "Cleaning and servicing", Page 14.
2.
Empty the overflow container and rinse it out.
3.
If required, unscrew the screw and clean the over-
flow container without the screw in the dishwasher.
4.
Clean the overflow container before screwing it
back into place.
5.
Ensure that the supply to the overflow container is
not blocked.
Remove any objects that have entered the appli-
ance once it has cooled down. To do this, remove
the grease filter. → Page 16
FAQs en
17
Advertisement
Table of Contents
