Childproof Lock; Individual Safety Switch-Off; Basic Settings - Siemens EH BE15 Series Information For Use

en Childproof lock
11.1 Activating the PowerBoost function
1. Select the cooking zone.
2.
Select power level ​ ⁠ and then touch the
The ​ ⁠ display lights up.
a The function has been activated.
12 Childproof lock
The hob is equipped with a childproof lock. This pre-
vents children from switching on the hob.
12.1 Activating the childproof lock
Requirement: The hob must be switched off.
▶
Touch and hold ​ ⁠ for four seconds.
a The display beside ​ ⁠ lights up for 10 seconds.
a The hob is now locked.
13 Individual safety switch-off
The safety function is activated if one cooking zone is
in operation for an extended period and you do not
change any settings. The cooking zone displays ​ ⁠ ​ ⁠
and switches itself off.
The time from 1 to 10 hours depends on the selected
power level.
14 Basic settings
You can configure the basic settings for your appliance to meet your needs.
14.1 Overview of the basic settings
Display Setting
​ ⁠ ​ ⁠

Childproof lock

​ ⁠ ​ ⁠ Audible signals
​ ⁠ ​ ⁠ Automatic switch-off of the cooking zones.
​ ⁠ ​ ⁠ Duration of the timer end signal tone
1
Factory setting
12
11.2 Deactivating the PowerBoost function
1. Select the cooking zone.
2.
​ ⁠ symbol. Touch the
the cooking zone switches back to power level ​ ⁠ .
a The function has now been deactivated.
Note: In certain circumstances, the PowerBoost func-
tion is automatically switched off in order to protect the
electronic elements inside the hob.
12.2 Deactivating the childproof lock
▶
Touch and hold ​ ⁠ for four seconds.
a The lock is released.
12.3 Automatic childproof lock
The hob is equipped with an automatic childproof lock.
This prevents children from switching on the hob.
Activating and deactivating
You can find more information about the automatic
childproof lock under
→ "Basic settings", Page 12.
Press any button to switch on the cooking zone.
Value
​ ⁠ - Manual.
​ ⁠ Automatic.
​ ⁠ – Switched off.
​ ⁠ – Confirmation and fault signals are switched off.
​ ⁠ – Only the fault signal is switched on.
​ ⁠ – Only the confirmation signal is switched on.
​ ⁠ – All signal tones are switched on
​ ⁠ ​ ⁠ – switched off.
​ ⁠ ​ ⁠ - ​ ⁠ ​ ⁠ - minutes until the appliance switches off auto-
matically.
​ ⁠ – 10 seconds
​ ⁠ – 30 seconds
​ ⁠ - 1 minute
​ ⁠ symbol. The ​ ⁠ display goes out and
1
1
1
1
.