Table of Contents
Advertisement
9.3 Automatic start for the ventilation
system
If you select a power level for a cooking zone, the auto-
matic start switches on.
The ventilation system starts at the corresponding
power level. You can find out how to change this set-
ting in section
→ "Basic settings", Page 12.
9.4 Run-on function for the ventilation
system
The run-on function leaves the ventilation system run-
ning for a few minutes after the hob has been switched
off. This allows you to remove any cooking fumes that
remain. The ventilation system then automatically
switches off.
Activating the fan run-on
As standard, the run-on time is activated with a max-
imum switch-off time.
10 Time-setting options
Your hob has various functions for setting the cooking
time:
¡ Switch-off timer
¡ Timer
10.1 Switch-off timer
Allows you to programme a cooking time for a hotplate
and its automatic switch-off once the set time has
elapsed.
Programming the cooking time
1.
Select the cooking zone and the required power
level.
2.
Touch
.
a The display lights up in the cooking zone.
3.
Use
or to select the cooking time.
a The time begins to count down.
Note: You can automatically set the same cooking time
for all cooking zones. You can find more information
about this under
→ "Basic settings", Page 12.
11 powerBoost
The PowerBoost function enables you to heat up large
quantities of water faster than when using power
level .
This function is available for all cooking zones,
provided the other cooking zone in the same group is
not in use.
You can find out how to change this setting in section
→ "Basic settings", Page 12.
Note: The run-on function only switches on if at least
one cooking zone has been switched on for at least
one minute.
Deactivating the fan run-on
Manually
To deactivate the function, touch .
Automatically
The appliance deactivates the run-on function if:
¡ The run-on time has elapsed.
¡ You switch the appliance on again.
Changing or deleting the cooking time
1.
Select the cooking zone.
2.
Touch .
3.
To change the cooking time, touch or or set it
to .
10.2 Timer
Enables the activation of a timer of 0–99 minutes. This
function can be used independently of the cooking
zones and other settings. It does not automatically
switch off the hotplates.
Setting the kitchen timer
1.
Select the hotplate and touch
a beside lights up.
2.
Use
or to select the required time.
a The time counts down.
Changing or deleting the timer duration
1.
Touch repeatedly until the display beside
lights up.
2.
To change the cooking time, touch or or set it
to .
Otherwise, and flash in the display for the selected
cooking zone. is then set automatically without activ-
ating the function.
Time-setting options en
twice.
11
Advertisement
Table of Contents
