Download Print this page

Raider RD-GG03 User Manual page 12

Gasoline generator

Advertisement

12
www.raider.bg
Before starting the gasoline generator, make sure that no consumers are plugged. Check
the fuel level, possibly add.
Check the oil – should be SAE 10W-30 or SAE 15W40.
Ensure sufficient ventilation of the unit.
Ensure that the ignition cable is attached to the spark plug.
Consider the immediate environment of the electric generator.
Turn off any electrical appliance switched from electric generator.
When starting, wear protective gloves.
1. Submit fuel by turning the faucet turned on Figure 1
2. Place the ignition switch contact position "ON" (Figure 2)
3. Slide the choke fully left following the nameplate
(figure 3)
4. Pull the starter cord gently (9) until you feel the grip
(effort) and pull the ignition of the machine. (Figure 4)

Advertisement

loading