Installation; Connections; Connecting Dmx Signal - Flash F7100070 User Manual

LED MOVING HEAD 12W RGBW 4in1 CREE BEAM 2° F7100070

DMX IN: XLR - 3 pin

DMX OUT: XLR - 3 pin

IP Rating: IP20

Housing made: ABS

Cooling: Active

Height [cm]: 24

Width [cm]: 13

Depth [cm]: 13

Weight [kg]: 2
5

INSTALLATION

After removing the packaging, check if the device was not damaged during transport. Before connecting to
the mains, make sure that the device is securely mounted. The manufacturer is not responsible for damage
caused by unstable mounting.
Ensure proper connection to the mains and proper grounding. Make sure that the electrical parameters are
consistent with device requirements. All activities, including connecting the device to the mains must be
performed by qualified personnel.
6

CONNECTIONS

The device is equipped with the DMX interface (3-pin XLR in/out). The connection is performed using cable
with XLR-female -> XLR-Male plugs.
The device is equipped with the following interfaces:
1. DMX (in/out): XLR 3-pin socket
2. Power in: IEC C14 socket
6.1

Connecting DMX signal

The connection is performed using cable with XLR-female -> XLR-Male plugs
3
www.flash-butrym.pl