R E M O T E C O N T R O - Ortech Y-H2 Operation & Installation Instructions

M. Touch Control (S9)
D
6) Press A, turn on the power, the bias light on and all function icons displayed.
7) Press B once, the fan runs at high speed.
Press B again, the fan runs at medium speed.
rd
Press B the 3 time, the fan runs at low speed.
th
Press B the 4 time, the fan stops.
8) Press C, turn on the light. Press it again, turn off the light.
9) When fan is ON, touch D once to set power-off time, every touch D means power off delayed by one minute.
When fan is OFF, touch D for 3 seconds to set time, you can touch C to set hour, B to set minute.
N. Remote Control
C B
On/off
Delay timer
Smoke or heat sensor
Lamp
Motor speed 3,2,1
Delay timer
A
18