Ortech Y-H2 Operation & Installation Instructions page 15

G. Touch control (S2A)
1) Press A, the fan runs at high speed. Press again, the fan turns off.
2) Press B, the fan runs at medium speed. Press again, the fan turns off.
3) Press C, the fan runs at low speed. Press again, the fan turns off.
4) Press D, turn on the light. Press it again, turn off the light.
5) When fan is OFF, touch E once to set clock. The hour on the LED screen flickers. You can use C and D to
set hour. Touch E again, the minutes on the LED screen flickers. You can use C and D to set minute. Touch
rd
E 3 time or touch F once to quit setting.
6) Press F, turn on power. Press it again, turn off power.
H. Touch Control (S3)
A B
1) Press A, the fan runs at high speed. Press again, the fan turns off.
2) Press B, the fan runs at medium speed. Press again, the fan turns off.
3) Press C, the fan runs at low speed. Press again, the fan turns off.
4) Press D, turn on the light. Press it again, turn off the light.
5) Press E, turn on power. Press it again, turn off power.
I. Touch control (S4)
C D
15
E