Advertisement
Quick Links
User's manual
Arc Welder
62549
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Related Manuals for WilTec 62549
Summary of Contents for WilTec 62549
- Page 1 User’s manual Arc Welder 62549 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 Do not weld fuel tanks or similar containers for explosive or flammable substances, if these have not been cleaned duly and it cannot be guaranteed that they are free from remnants such as © by WilTec Wildanger Technik GmbH Item 62549 Page 3 http://www.WilTec.de...
- Page 4 Always make sure to completely unfold the hose connecting the burner and the main body of the welder when feeding wire as the moving wire might otherwise damage the hose by puncturing it from the inside. © by WilTec Wildanger Technik GmbH Item 62549 Page 4 http://www.WilTec.de...
- Page 5 At the front part of the device, there is a rotary regulation knob that allows setting the tension in steps of 20 A. Level 1 means a welding current of 40 A, level 6 is 140 A. © by WilTec Wildanger Technik GmbH Item 62549 Page 5 http://www.WilTec.de...
- Page 6 The distance between the tip of the burner and the workpiece should thereby not exceed 10 mm. 7. Cover your eyes with a welding shield by closing the visor of your welding helmet or holding a welding shield in front of your face. © by WilTec Wildanger Technik GmbH Item 62549 Page 6 http://www.WilTec.de http://www.aoyue.eu...
- Page 7 Replace the nozzles from time to time to guarantee a proper electric contact between them and the wire. It is advised to use dry air when cleaning the nozzles. © by WilTec Wildanger Technik GmbH Item 62549 Page 7 http://www.WilTec.de...
-
Page 8: Troubleshooting
The device does not react to the trigger being Check the burner as well as its connections. pulled despite the mains indicator being lit. The system is overheated and requires some time to cool down. © by WilTec Wildanger Technik GmbH Item 62549 Page 8 http://www.WilTec.de http://www.aoyue.eu 2022-1 http://www.teichtip.de... - Page 9 German law related to electrical and electronic equipment and appliances. All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a crossed- out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed of with the domestic waste.