Stihl MSA 300.0 Instruction Manual page 59

Hide thumbs Also See for MSA 300.0:
Table of Contents

Advertisement

Available languages

Available languages

25 Troubleshooting Guide
Always remove the battery before carrying out any inspection, cleaning or maintenance.
Condition
LEDs on
Battery
Run-time is too short.
During sawing, the
wood smokes or
smells burnt.
Battery is not being
1 LED glows
charged even though
red.
LED on charger
glows green.
"CHAIN OIL" LED
glows red.
"CHAIN OIL" LED
flashes red.
0458-009-8601-A
Possible Cause
Remedy
Battery not fully
► Charge the battery, @ 12.
charged.
Useful life of battery
► Have the battery checked by an authorized STIHL servicing
has been reached or
dealer.
exceeded.
The chain is dull or
► Properly sharpen the chain, @ 24.4.
improperly
sharpened.
Working technique is
► Obtain instruction on proper working technique.
improper or the saw
is being mis-used.
Insufficient bar and
► Increase oil feed rate, @ 14.4.3.
chain oil.
Battery too hot / too
► Allow the battery to warm up or cool down gradually at
cold.
ambient temperatures of about 50 °F to 68 °F (10 °C to
20 °C).
► Operate the charger only in enclosed, dry rooms at ambient
temperatures of 41 °F to 104 °F (5 °C to 40 °C).
Insufficient bar and
► Filling the Chain Oil Tank, @ 14.4.2.
chain oil in the tank,
► If the LEDs still glows, have the chain saw checked by an
or the bar and chain
authorized STIHL servicing dealer.
are not receiving oil.
The chain oil sensor
► Have the chain oil sensor checked by an authorized STIHL
is damaged.
servicing dealer.
English
57

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Msa 300.0 c

Table of Contents