Kit Description - Immergas 3.020166 Instruction And Warning Book

KIT DESCRIPTION.

The Solar Container kit was designed to fit at least the installation
space for the Gaudium Solar V2, Trio V2, Basic Magis Pro, Trio
Pack and Trio Hydro in external and internal walls.
The lower part of the frame has the holes necessary for the
hydraulic, gas, electrical, condensate drain and temperature
control connections.
It has holes on its rear and right sides for connections to the
heat pumps.
PRE-SECTION DETAIL FOR FLUE CONNECTION.
Front and rear flue gas connection
Height Exa Connection
64 Discharge 80
88
109 Concentric
Height Connection
TT - Tera - Omnia -
Victrix Hybrid Indoor
98 Discharge 80
107 Concentric
111
Victrix EXA series boilers
Intake 80
Victrix TT - Victrix Tera - Victrix Omnia -
Victrix Hybrid Indoor Unit
Unit
Intake 80
The upper part has the holes for the outlet to the flue ("B type"
and "C type" installations) and to the intake duct (only for "C
type" installation) using the Immergas flue (to be used only in
the presence of boilers).
ATTENTION:
Connection from the left side of the Solar Container is only
possible with the intake or exhaust of the separator Ø 80/80.
Upper flue gas connection
Attention:
For Victrix TT, Victrix Tera and UI Victrix Hybrid
with 60 / 100 concentric kit, it is always necessary
to also use the 60 / 100 flanged kit
10
Fig. 2