CPI Alio Note Installation Manual page 2

Safety instructions and Compliance
Safety instructions and Compliance
Before installing the Alio™ Note card reader, please carefully read this installation guide, and in particular the safety instructions, at least
once. This is to ensure that the contents of this installation guide have been understood and the reader knows how to install and set up the
card reader.
Protecting persons and equipment
Technical specifications
Voltage operating range 20–42 V DC
Full load amps (FLA)
Power consumption
Temperature range
Relative humidity
Compliance
Alio™ Note card reader has been evaluated and is compliant with
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by CPI could void the user's authority to operate the equipment.
FCC ID: QP8ALIONOTEVZ
2
Risk of injury
• Turn off power to the machine before installing or removing the card reader.
• The installation work described in this guide may only be carried out by qualified technicians or CPI-
trained and authorized personnel.
Risk of damage to the card reader
• The card reader control board is fitted with components that can be damaged by electrostatic discharge.
Please observe ESD precautions for components exposed to the risk of electrostatic discharge. Installers
should be properly grounded.
• The card reader must not be operated in the presence of flammable gases, fumes, or water.
• Keep water and other liquids away from the card reader. It is not suitable for use in areas where there
could be direct contact with water jets.
• When transporting the device only use its original packaging. It is only in this way sufficiently protected.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Please dispose of the device correctly at the end of its service life. Do not dispose of any part of the cashless
reader by incineration. Details regarding the return and recycling of used units and consumables can be obtained
from your local branch office.
We reserve the right to make technical modifications to the device, which are not covered by this guide!
200 mA max.
12 W
Operating temperature: -20–70 °C
Storage temperature: -30–70 °C
5–95% (non-condensing)
maximum relative humidity of 50% at extreme temperatures
• UL 756 – Coin and Currency Changes and Actuators
• CSA C22.2 No. 128 – Vending Machines.
Published by CPI
Alio™ Note Card Reader
44060-IG-01-01-EN_CPI_Alio Note Card Reader_Installation Guide_V1.0_.docx