Table of Contents
Advertisement
Installation
16
Mount card reader through the back of the vendor door, and secure using
the four hex nuts on the vendor's mounting posts.
17
Secure green ground cable to a mounting post.
3.4.3
Mounting connection hub and connecting other vendor peripherals
18
Mount the card reader's connection hub magnetically inside the
and service.
19
Connect all other vendor peripherals to the connection hub as labelled and route all connections using zip ties and snips for cable management if
necessary.
20
Restore power to the vending machine and follow your company's procedure for activating a telemeter.
Alio Note card reader will connect to the cellular network.
3.5
After installation
The Alio Note card reader is fully configured for operation from the factory and once mechanically installed onto a Talos or Series 2000 note
validator and powered. The card reader is ready to accept cards for transactions.
Detailed information of connection status can be viewed by pressing the red "X" button on the card reader display 5 times. The display will
reconfigure to indicate the status.
10
17
Fig. 10: Mounting card reader through vendor door
machine so that its center button and LED ring is accessible for operation
Published by CPI
Alio™ Note Card Reader
44060-IG-01-01-EN_CPI_Alio Note Card Reader_Installation Guide_V1.0_.docx
16
Advertisement
Table of Contents
