Application Advice - Skil 7380 Original Instructions Manual

Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR SANDERS
standstill
when original accessories are used
ear protection
Secure the workpiece (a workpiece clamped with
Do not work materials containing asbestos (asbestos
dustbox and keep other persons and combustible
sanding sheets
wear a dust mask and work with a dust
extraction device when connectable
work with a dust extraction device when connectable
making any adjustment or changing any accessory
USE
! disconnect the plug
! the dust suction requires the use of perforated
sanding sheets
! perforation in sanding sheet should correspond
with perforation in sanding foot
! replace worn sanding sheets in time
! always use the tool with the total sanding surface
covered with sanding paper
5
hold it in that position while pulling dustbox C
backwards
place
illustrated
! do not use dustbox when sanding metal
backwards
! before the sanding surface reaches the
workpiece, you should switch on the tool
! before switching off the tool, you should lift it
from the workpiece
- with wheel B 2
speed
- adjust speed to grit size used
testing out on spare material
! while working, always hold the tool at the
grey-coloured grip area(s)
! do not apply too much pressure on the tool; let
the sanding surface do the work for you
marks

APPLICATION ADVICE

5
wear a dust mask and
4
2
6
2