Advertisement
2
.
2
C
o
n
n
e
c
t
o
2
.
2
C
o
n
n
e
c
t
o
Interface
USB1 / USB2
Console
SFP+ (P1~P2)
P3~P6
P7~P10
The ports "P3 to P6" are switchable. It can be used for LAN connection or WAN
connection according to the settings configured in WUI.
r
s
r
s
Description
Connecter for the USB device.
Provided for technician use.
Connecter for SFP module with the rate of 10G/1G bps.
Connectors for remote network devices or local
network devices (WAN/LAN) with the rate of
1G/100M/10M bps.
Connecter for local network devices (LAN) with the rate
of 1G/100M/10M bps.
The Factory Reset button is used to restore the default
settings. Turn on the router (ACT LED is blinking). Press
the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual,
release the button. Then the router will restart with
the factory default configuration.
Connecter for a power cord.
ON/OFF - Power switch.
3
Advertisement
