Table of Contents
Advertisement
E8G01BD(EN).fm Page 25 Monday, December 4, 2006 2:48 PM
DVD Setup
In Setup menu, QUICK mode, CUSTOM mode and INIT. mode (refer to pages 25-27) are available. QUICK mode consists
of the setting menus often needed, and you can make all settings required in CUSTOM mode. You can make the settings of the
QUICK
items with
mark in QUICK mode.
Language Setting
Language setting can be varied with some DVDs or DivX
Subtitles recorded in CD-R/RW.
1) In Stop mode, press
SETUP
2) Press
or
to select "CUSTOM", then press
s
B
•CUSTOM mode screen will appear.
3) Press
or
to select "LANGUAGE", then press
s
B
to confirm.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
DivX SUBTITLE
4) Press
or
to select the below items, then press
K
L
5) Press
or
to select an option, then press
K
L
6) Press
SETUP
to exit.
AUDIO (*1, 2, 3) :
• Sets the audio language.
• The default setting is "ORIGINAL" (original audio
language of the disc).
SUBTITLE (*1, 2, 3) :
• Sets the subtitle language.
• The default setting is "OFF".
DISC MENU (*1, 2) :
• Sets the language for the DVD menu.
• The default setting is "ENGLISH".
QUICK
PLAYER MENU :
• Sets the language for the On-Screen display.
• The default setting is "ENGLISH".
DivX
SUBTITLE (*4) :
®
• Sets the DivX
subtitle language.
®
• The default setting is "OFF".
Note:
*1 : If "OTHER" is selected in the "AUDIO", "SUBTITLE"
or "DISC MENU" screen, press 4-digit number to enter
the code for a language you choose. (Refer to "Language
Code" on page 28.)
*2 : Only the languages supported by the disc can be selected.
*3 : Even if DVDs contain multiple audio or subtitle
languages, "LANGUAGE" setting screen for "AUDIO"
or "SUBTITLE" may not be available with some discs.
Then, use
AUDIO
or
SUBTITLE
*4 : If you want to display the Russian subtitle, you can select
either "RUSSIAN1" or "RUSSIAN2" which depends on
type of the subtitle files.
Display Setting
You can change the display functions.
1) In Stop mode, press
SETUP
2) Press
or
to select "CUSTOM", then press
s
B
•CUSTOM mode screen will appear.
3) Press
or
to select "DISPLAY", then press
s
B
confirm.
DISPLAY
TV ASPECT
STILL MODE
TV TYPE
VIDEO OUT
®
.
ENTER
.
ENTER
ORIGINAL
OFF
ENGLISH
ENGLISH
OFF
ENTER
.
ENTER
.
. (Refer to page 21.)
.
ENTER
.
ENTER
to
4:3 LETTER BOX
AUTO
AUTO
SCART
25
4) Press
or
to select the below items, then press
K
L
Select options following instructions below.
5) Press
SETUP
to exit.
QUICK
TV ASPECT :
4:3 LETTER BOX : When viewing a 16:9 picture on a 4:3
aspect TV screen, black bars appear on
the top and bottom of the screen.
4:3 PAN & SCAN : When viewing a 16:9 on a 4:3 aspect TV
screen, a full height picture with both
sides trimmed is presented.
16:9 WIDE
: If a wide-screen TV is connected to this
unit, select this setting.
• Press
or
to select a setting, then press
K
L
• The default setting is "4:3 LETTER BOX".
STILL MODE :
AUTO : Automatically select the best resolution setting
("FRAME" or "FIELD") based on the data
characteristics of the pictures.
FIELD : Select "FIELD" when the pictures are still unstable
even if "AUTO" is selected. "FIELD" stabilizes the
pictures, although the picture quality may become
coarse due to the limited amount of data.
FRAME : Select "FRAME" to display relatively motionless
pictures in higher resolution. "FRAME" improves
the picture quality, although it may unstabilize the
pictures due to simultaneous output of two FIELD
data.
Note: •
An individual picture on TV screen is called as
FRAME, which consists of two separate images called
as FIELD. Some pictures may be blurred at the
"AUTO" setting in Still mode due to their data
characteristics.
• Press
or
to select an option, then press
K
L
• The default setting is "AUTO".
TV TYPE:
• Select a video system setting between "AUTO" and "PAL".
AUTO : Changes the video system (PAL / NTSC)
automatically according to the format of the
inserted disc.
PAL
: Outputs a modified PAL signal for viewing discs
recorded with the NTSC system on a PAL system
TV.
ENTER
• Press
repeatedly to select "AUTO" or "PAL".
• The default setting is "AUTO".
VIDEO OUT:
SCART
: If your TV has a SCART terminal and
is connected to it, select this setting.
COMPONENT
: If your TV has component jacks and is
INTERLACE
connected to them, select this setting.
(Component (I))
COMPONENT
: If your TV is compatible with
PROGRESSIVE
progressive scanning and connected to
(Component (P))
it, select this setting. "P.SCAN" will
appear on the front panel display.
• Press
or
to select an option, then press
K
L
• The default setting is "SCART".
Audio Setting
Choose the appropriate audio settings for your equipment. It
only affects during the playback of DVDs.
1) In Stop mode, press
SETUP
.
ENTER
.
ENTER
.
ENTER
.
ENTER
.
EN
Advertisement
Table of Contents
