Table of Contents
Advertisement
E8G01BD(EN).fm Page 14 Monday, December 4, 2006 2:48 PM
Recording One Programme While Viewing Another
You can record one programme while viewing another. To
1)
start recording, follow steps
Recording the Same Programme". Then, set the TV to the
channel you want to watch.
To Monitor the Progress of Your Recording
Select the video channel on the TV.
Assemble Function
You can record in continuation from previous programme on
a pre-recorded tape.
1) Insert a pre-recorded tape. Press
2) Press
PAUSE
at the desired point on the tape.
F
3) Press
REC/OTR
. The unit will be in the Recording Pause
mode.
4) Press
CHANNEL
(
/
) to select the channel to be
K
L
recorded.
5) Press
REC/OTR
or
PAUSE
6) Press
STOP
when recording is completed.
C
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing
REC/OTR
.
1) Follow steps
1)
to
3)
in "Viewing and Recording the Same
Programme".
2) Press
REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
I [0:30]
I
I[1:00]...
(Normal
(OTR:
recording)
30 minutes)
Recording stops when 0:00 is reached.
• To check time remaining during an OTR, press
• To change the recording length during an OTR, press
REC/OTR
repeatedly until the desired length appears.
• To stop an OTR before recording is finished, press
STOP
.
C
• To cancel the OTR but continue recording, press
repeatedly until "I" appears without the recording length.
Timer Recording
You may programme the unit to start and end a recording
while you are away. You can set 8 programmes to record on
specific days, daily or weekly within a 1-year period.
• Use the remote control for this procedure.
• Insert a cassette tape with its erase-prevention tab in place.
(If necessary, rewind or fast forward the tape to the point at
which you want to begin recording.)
1) Press
VCR
, then
MENU
.
2) Press
or
to select "TIMER", then press
K
L
Note: •
If you have not set the clock yet, "CLOCK" setting
menu appears. If so, follow the steps outlined in the
"Setting the Clock". (Refer to page 9.) Then, set the
timer.
• When you press
after pressing
B
7)
, the input mode will move to the next item.
• If you do not press
within 5 seconds of setting an item,
B
the input mode will move to the next item.
• Press
to go back to the previous item from the current
s
setting during steps
4)
to
8)
TIMER NUMBER is flashing, the entire programme
contents will be erased.
3) Programme number flashes. Press
the desired programme number appears. Then, press
4)
to
under "Viewing and
PLAY
to start playback.
B
. The recording will begin.
F
I[7:30]
I[8:00]
DISPLAY
.
REC/OTR
.
B
or
during steps
3)
to
K
L
. If
is pressed when the
s
or
repeatedly until
K
L
.
B
14
4) Select once, daily, everyday or weekly recording.
For once-only recording
: Press
the relevant month appears, and then press
repeatedly until your desired day appears.
For daily recording
: To record a TV programme at the
same time on the same channel from Monday through
Friday. While the month digit is flashing, press
repeatedly to select "MO-FR".
For everyday recording
: To record a TV programme at
the same time on the same channel everyday. While the
month digit is flashing, press
"MO-SU".
For weekly recording
: To record a TV programme at the
same time on the same channel every week. While the
month digit is flashing, press
"W-MO" (example: every monday).
5) Press
or
repeatedly until the relevant start hour
K
L
appears. Next, enter the minute digit.
6) Press
or
repeatedly until the relevant end hour
K
L
appears. Next, enter the minute digit.
7) Press
or
repeatedly until the relevant channel number
K
L
appears.
8) Press
or
repeatedly until the desired tape speed
K
L
appears.
9) Press
or
repeatedly to set PDC "ON" or "OFF".
K
L
10)Press
. Programme is now completed.
B
•To set another timer programme, repeat steps
11)Press
MENU
to exit.
12)Press
T-SET
to activate a Timer Recording.
•If the unit switches to the DVD mode after pressing
T-SET
, the
indicator will not appear. The
indicator will appear when the unit is turned off by
STANDBY-ON
pressing
.
•If the unit is turned off after pressing
indicator will appear.
MENU
TIMER
SET UP
INITIAL
To Stop a Timer Programme Which Has Already
Started
STOP/EJECT
Press
on the unit.
Note: • STOP
on the remote control will not function in the
C
Timer Recording mode.
To Correct Timer Programmes
If the unit is already in timer standby mode, press
STOP/EJECT
on the front panel or
control to exit from the standby mode.
1) Repeat steps
1)
3)
to
in the "Timer Recording".
2) Select the setting you want to change using
3) Enter the correct numbers using
4) Press
MENU
to exit.
5) Press
T-SET
to return to timer standby mode.
To Cancel or Check the Start/End Time
If the unit is already in timer standby mode, press
STOP/EJECT
on the front panel or
control to exit from the standby mode.
1) Repeat steps
1)
2)
to
in the "Timer Recording".
2) Select the programme number you want to check using
or
. The details of selected programme appears on the
L
TV screen. You may cancel the entire programme by
pressing
.
s
3) Press
MENU
to exit.
or
repeatedly until
K
L
or
K
L
or
K
L
or
repeatedly to select
K
L
or
repeatedly to select
K
L
3)
to
10)
.
T-SET
, the
TIMER NUMBER
1
--/--
DATE
--:--
START
--:--
END
--
CHANNEL
--
SPEED
--
PDC
T-SET
on the remote
or
.
s
B
or
, then press
.
K
L
B
T-SET
on the remote
K
EN
Advertisement
Table of Contents
