Intended Use; Designation Code; Fm01 Linear Module - LinMot FM01-48 Installation Manual

Installation Guide Linear Modules

3 Intended Use

3.1 Designation Code

FM01-48-1440_1100_1CF48x240F-HP-BE02-MD02-C

3.2 FM01 Linear Module

Option: Trailing Chain Kit
(with mounting brackets)
End plate
LinMot® FM01 linear modules are moving stator applications with tubular linear motors for use in industrial
and commercial installations. The mechanical design is based on a special aluminium profile on which up to
two high-precision profile rail guides are attached. Use of ball bearings in the carriages guarantee a reliable
and smooth operation, support of external forces, torques and bending moments. These products offer high
guidance accuracy, facilitate dynamic and precise positioning of load. FM01 modules can be mounted
together into a gantry or semi gantry designs without any additional adapters. It is also possible to run
multiple stators on the same guide. Direct mechanical compatibility with other LinMot linear modules for the
NTI AG / LinMot
Cable connector
Carriage with
mounting plate
Option: External incremental sensor (sensor kit, stripe)
FM01-48
Connector type
Mechanical design
Bearing type
Carrier type
Number of carriers
Carrier stroke
Overall length
Module type
Aluminium profile
Stator
Rail guide
ENG
Page 7 / 36