Service And Repairs; Two Year Warranty; Specifications - Stanley STHT77502-1 Original Instructions Manual

Service and Repairs

nOTE: Disassembling the laser level will void all warranties on
the product.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by authorized service
centers. Service or maintenance performed by unqualified
personnel may result in a risk of injury. To locate your nearest
STANLEY service center, go to http://www.sTAnlEY.com.

Two Year Warranty

Stanley warrants its electronic measuring tools against
deficiencies in materials and / or workmanship for two years
from date of purchase.
Deficient products will be repaired or replaced, at Stanley's
option, if sent together with proof of purchase to:
stanley UK sales limited
Gowerton Road
Brackmills, Northampton NN4 7BW
This Warranty does not cover deficiencies caused by accidental
damage, wear and tear, use other than in accordance with the
manufacturer's instructions or repair or alteration of this product
not authorised by Stanley.
Repair or replacement under this Warranty does not affect the
expiry date of the Warranty.
To the extent permitted by law, Stanley shall not be liable under
this Warranty for indirect or consequential loss resulting from
deficiencies in this product.
This Warranty may not be varied without the authorisation
of Stanley.
This Warranty does not affect the statutory rights of consumer
purchasers of this product.
This Warranty shall be governed by and construed in
accordance with the laws of the country sold where in and
Stanley and the purchaser each irrevocably agrees to submit
to the exclusive jurisdiction of the courts of that country
over any claim or matter arising under or in connection with
this Warranty.
Calibration and care are not covered by warranty.
nOTE: The customer is responsible for the correct use and
care of the instrument. Moreover, the customer is completely
responsible for periodically checking the accuracy of the laser
unit, and therefore for the calibration of the instrument.

Specifications

STHT77502-1
Light Source
Laser Wavelength 630–680 nm visible
Laser Power ≤ 1.5 mW CLASS 2 LASER PRODUCT
Working Range 12 m (36')
Accuracy ±5 mm @ 10 m (± 3/16" @ 33')
Power Source 2 AA (1.5 V) size batteries (3 V DC)
Operating Temperature -10 °C to 40 °C (14 °F to 104 °F)
Storage Temperature -20 °C to 60 °C (-5 °F to 140 °F)
English
STHT77592-1
Laser diodes
510–530 nm visible
16 m (53')
11