Yamaha FZ 25 2021 Supplementary Service Manual page 64

1 Coupler cover
2 Sidestand switch lead
3 Sidestand switch
4 ACM Lead
5 Clamp
CABLE ROUTING
È All the couplers shall be properly covered with
couplers cover, after connecting. Layout of leads
can be in random order.
É Band shall be touched to frame.
Ê Clamp shall be touched to band.
Ë Band shall be wrapped to frame and fix the
inserted part to lower side.
Ì After clamp sidestand switch lead shall be
adjusted without slack.
Í Layout of leads in clamp shall be in random
order.
Î Set the tip of the clamp to the inner side, tip of
the clamp shall not be cut.
Ï Set the tip of the clamp to the upper side, tip of
the clamp shall not be cut, clamp threading
direction is not required.
Ð Pass the clamp from the lower side of bracket.
Ñ Set the tip of the clamp to the lower side, tip of
the clamp shall be cut 5 mm maximum, clamp
threading direction is not required.
2-27
SPEC