Yamaha FZ 25 2021 Supplementary Service Manual page 57

1 Throttle cable (Return side)
2 Throttle cable (Pull side)
Left handlebar switch lead
3
Clutch cable
4
5 Clutch switch lead
6 Auxiliary light lead
Main switch lead
7
Front turn signal light lead (left)
8
9 Headlight stay
Guide stay
0
Front turn signal light lead (right)
A
Right handlebar switch lead
B
C Front brake hose
Headlight assembly
D
Auxiliary light
E
F Upper cover
G Meter assembly lead
Headlight assembly lead
H
Wire harness holder
I
J Wire harness
K Rubber band
CABLE ROUTING
È Clamp the right handlebar switch lead at
straight portion of right handlebar.
É Clamp the clutch switch lead and the han-
dlebar switch lead at straight portion of left
handlebar.
Ê Keep the auxiliary light leads outside as
shown and then assemble the headlight
assembly.
Ë Insert the clamp in the hole of headlight
stay.
Ì Pass the wire harness through guide of
headlight stay.
Í Layout of leads in band shall be in random
order.
Î Pass the headlight upper cover to guide of
headlight assembly.
Ï Keep the headlight lead outside as shown
and then assemble the headlight assembly.
Ð Insert the wire harness clamp in the hole of
stay (left & right).
Ñ Meter assembly lead shall not be pinched
between guide stay and headlight assem-
bly.
Ò After connecting the meter coupler, cover
shall be properly inserted in meter assem-
bly.
Ó Pass the headlight assembly lead through
the guide of headlight.
Ô After connecting the headlight coupler fix
the coupler from rear side in headlight
assembly guide.
2-20
SPEC