Advertisement
scsi-ag.bk : scsiadm.fb4 Page 5 Tuesday, September 15, 1998 2:25 PM
All manuals and user guides at all-guides.com
It is strongly recommended that you switch the Maximum Sync
Transfer Rate to 20 MB per second when connecting an external
SCSI device.
• Enable Disconnection
To optimize SCSI bus performance, Enable Disconnection should be
set to
.
Yes
• Initiate Wide Negotiation
This option determines whether the SCSI channel attempts 16-bit
data transfer instead of 8-bit data transfer.
• Send Start Unit Command
When set to
this option reduces the load on your computer's
Yes
power supply by allowing the interface to power-up SCSI devices
one-at-a-time when you start your computer.
This option is not supported by some SCSI devices. Some SCSI
devices require a jumper to be changed before they can respond to
this command.
• BIOS Multiple LUN Support
More advanced SCSI devices can have several logical units (LUN).
This option determines whether booting a SCSI device that has
multiple LUNs is supported. Set this option to
has multiple LUNs. It is set to no by default.
• Include in BIOS Scan
This setting, when set to
by the host adapter with this SCSI ID. When set to
does not control the SCSI device.
Yes
, allows the SCSI device to be controlled
Yes
Configuring the SCSI Bus
if your boot device
, the adapter
No
English
5
Advertisement
