Zte ZXSDR R8860 Installation Manual page 83

Note:
The following steps describe the installation process as a reference for installation
personnel. During the on-site installation process, please carefully read the installation
manual provided with the antenna, and carry out the installation according to the actual
condition.
Perform the following steps to install a directional antenna:
Steps
1. Firstly assemble fastener "C" onto the upper and lower ends of antenna as shown in
Figure
directional antenna.
Note:
l
All accessories must be installed with spring and plain washers.
l
Usually the antenna fastening accessories and the angle adjustment device
accessories have already been installed on the antenna before fixing into the
tower.
SJ-20100722143906-002|02/20/2011(R1.3)
5-8, then mount fasteners "B" and "A" to complete the initial installation of the
Chapter 5 Main Antenna Feeder System Installation
5-11
ZTE Proprietary and Confidential