Table of Contents
Advertisement
4. GENERAL SAFETY PRECAUTIONS
- Always read through these safety instructions with care and be sure to follow them,
- electricity must be turned off before you can begin cleaning or maintenance work (see Point 8),
- maintenance work on the fan unit must be carried out by a technically qualified professional, contact the
supplier to do so,
- safety precautions have been created for each operation, such as;
- installation,
- electrical connection,
- implementation
- maintenance and repairs,
- never use the fan unit for applications that it is not designed for,
- use electrical cables which are suitable for the maximum motor load,
- the operator/assembler/installer must be conscious of the fan unit's safe operation before beginning
maintenance work,
- safety guards and similar which are removed or disassembled for installation or maintenance work must be
returned to their proper position after the installation or maintenance work and before reconnection to the
power supply.
- before using the fan unit, check to see that all safety guards are properly installed and/or the fan unit can
function properly. When in doubt, do not take any chances; call for the supplier,
- turning the fan unit on and off must always be done with care (see Point 7),
- never overload the fan unit (see Point 7),
- when an abnormality appears, such as excessive vibration or noise, turn the fan unit off immediately.
- always wear protective clothing when working on the fan unit,
- for questions or doubts regarding the safe operation of the fan unit, always contact the supplier.
6
Advertisement
Table of Contents
