Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Woods AC
Summary of Contents for Woods AC
- Page 1 PLATE FANS (AC & EC)
-
Page 2: Table Of Contents
CONTENTS 1. Operational area ..............................2. Safety instructions ..............................3. Transport, storage ..............................4. Mounting .................................. 5. Operating conditions ............................. 6. Start-up ..................................7. Communications options for EC fan programming .................... 8. Maintenance, repair, cleaning ..........................9. Disposal / Recycling .............................. -
Page 3: Operational Area
The fans may not be operated until they are installed in line with their intended use. The supplied and certified guard grille of Woods Plate fans is designed in accordance with DIN EN ISO 13857 Table4 (from the age of 14 up). -
Page 4: Transport, Storage
3. TRANSPORT AND STORAGES • Wear safety shoes and gloves for handling! • Observe the weight data on the type code. • Do not transport the fan by the connecting cables! • Avoid impacts and collisions, especially on fans set-up on devices. •... - Page 5 ‘• Do not use metal compression-gland fittings with plastic terminal boxes. • Use a dummy plug seal for the compression-gland fitting. • When opening cable glands on the fan/motor, check the condition of the threaded connections and seals. • Only use lines which can guarantee a permanent seal around the cable glands. •...
-
Page 6: Operating Conditions
• Woods Plate Fans are suitable for operation with frequency inverters when the following points are compiled: - Between the inverter and the motor, sinusoidal filters should be incorporated which are effective for all phases (sinusoidal output voltage, phase against phase, phase against protective conductor) as offered by manufacturers. -
Page 7: Start-Up
Do the installation position and the arrangement of the condensation drain holes in the motor corresponds to each other (does not apply to protection class IP55 fans). • The designated use of Woods Plate fans with VDE certification assumes connection in a device or via a control unit. •... -
Page 8: Maintenance, Repair, Cleaning
8. MAINTENANCE, REPAIR, CLEANING • During all work on fan in the hazardous area: Maintenance work to be only performed by trained service personnel. Observe the safety and labour regulations (DIN EN 50 110, IEC 364). The rotor must be stand still! Open the electrical circuit and secure against being switched back on. -
Page 9: Disposal / Recycling
9. DISPOSAL / RECYCLING Disposal must be carried out professionally and environment friendly in accordance with the legal stipulations. 10. WIRING DIAGRAMS AC 1 Phase SIZE 250mm - 310mm 1~ motor with capacitor and thermostatic switch (if built in). brown... - Page 10 AC 3 Phase SIZE 310mm – 710mm 3~ motor, 2 speeds (∆/y switch over) with thermostatic switch (if built in). Without bridge when using speed change-over switch. brown blue black grey Orange white GNYE green-yellow High speed/∆-connection Low speed/Y-connection EC 1 Phase...
- Page 11 EC 3 Phase SIZE 450mm – 710mm ECBlue BASIC-MODBUS...
- Page 12 EC 3 Phase SIZE 450mm – 710mm ECBlue BASIC...
-
Page 13: Ce & Ukca Markings
11. CE & UKCA MARKING 11.1 Declaration of Conformity We hereby declare under our sole responsibility that Woods Air Movement products comply with the requirements of the applicable UK and EC/EU directives. The Declaration of Conformity for compliance with the applicable directives exclusively refers to fans that are connected according to the operating instructions and operated independently with sinusoidal power supply. - Page 14 Axial Way Colchester CO4 5ZD, GB Herewith we declare that the incomplete machine: Designation of the machine Model or Type of machine Since year of manufacture Wood Plate Fan (AC) PFA… 2021 Woods Plate Fan (EC) PFE… 2021 Along with motor type: •...
- Page 15 Woods Air Movement Ltd. delivers smart and energy efficient Air Movement and Fire Safety solutions to support every application area. We offer our customers innovative technologies, high quality and outstanding performance supported by more than fifty years of accumulated industry application experience.