Table of Contents
Advertisement
6. TRANSPORTATION
6.1 TRANSPORT INSPECTION
Check the fan immediately after you receive it and make sure that it has not been damaged during transport.
If you discover any damage, get in touch with the transportation company without delay.
• Check the information on the fan rating plate.
• Proper procedures must be followed when transporting the product.
• Faulty conditions in transporting may result in serious damage on the product.
6.2 TRANSPORT SAFETY
• Loading must be carried out as instructed.
6.3. IMMEDIATE STORAGE
If the fan is to be stored before or in between uses, the following needs to be taken in account:
• Original packaging is to be used.
• If the storage conditions require it, additional protection may be added.
• The hatch of the product must be closed during the storage.
• During long term storage, indoor premises must be used.
6
7. LIFTING
The SMHA should be lifted to the roof with straps along with a pallet at the bottom of the product. Steel binding
bands used to retain the unit onto its pallet must not be cut before lifting. Lifting strops should be placed under
the pallet so that they are outside the pallet cross/base timbers. Never place strops on the inside of these cross/
base timbers, as this may cause the unit to become unstable and slip.
Once the product has been placed on the roof, on its pallet, the steel retaining bands can be cut. The unit cover
(lid) can then be freely opened, as there isn't a locking device. The product features lifting lugs, which are only
designed for short transfer lifts from the shipping pallet to the roof surface. Lifting chains can be attached to them.
Keeping the lid open while lifting is ensured
by stringing another chain through the hook
on the inside of the lid.
7
Advertisement
Table of Contents
