Using Your Appliance - Akai A61023 Instruction Manual

USING YOUR APPLIANCE

BEFORE FIRST USE
1. Remove the product from the box.
2. Remove any packaging from the
product.
3. Please retain all packaging until you
have checked and counted all the
parts and the contents against the
parts list.
4. Your appliance is now ready for
normal use.
INSTALLING THE BATTERIES
The Wake-Up Alarm Clock Radio needs
two AAA batteries to operate. The batteries
can be used as a backup power source
if the electricity is down or there is no
access to a network or computer.
Note: The batteries save your settings
if the alarm clock is used in different
locations.
1. Lay the clock face down on a sturdy
surface that will not scratch the
display.
2. On the back of the clock, open the
battery compartment by sliding
your finger down on the arrow. The
compartment door should slide out.
3. Insert 2 AAA batteries into the
compartment. Make sure the
batteries match the polarity indicated
inside the clock.
4. Re-attach the battery cover.
5. Adjust the stand so the alarm clock
stands upright.
Note: When only the batteries are used,
the clock's functions are limited:
• The time display will switch off in 5
seconds. Press any button to back of
6
the clock to turn it back on.
• The sound the alarm is set to will
play for 2 minutes with the ability to
snooze the alarm. Press or touch any
button except the Snooze button to
stop the sound.
• The light function is not available.
• The radio function is available.
CONNECTING THE POWER SUPPLY
The clock comes with a micro USB cable
and a power adaptor.
• To use the power adaptor, connect
the micro USB cable to the clock and
the other end to the adaptor. Plug
the adaptor into the mains to use the
clock.
• To use to a computer to power the
clock, connect the micro USB cable to
the clock and plug the other end into
the computer's USB port.
SETTING THE TIME
1. When the clock is plugged in, the
hours on the time display will begin
to blink. After 8 seconds the time will
default to 12:00 am
2. To set the hours, press the plus or
minus buttons (on the clock's face).
3. Press the Current Time button
confirm your choice.
4. To set the minutes, press the plus
or minus buttons. Press the Current
Time button to confirm your
choice.
5. Press the Current Time button
the hours and minutes stop blinking
to continue setting the time.
to
if