HP ProLiant SL160z G6 Maintenance And Service Manual page 38

All manuals and user guides at all-guides.com
Figure 14 Removing the processor installation tool
Close the processor socket retaining bracket and the processor locking lever.
4.
CAUTION: Be sure to close the processor socket retaining bracket before closing the processor
locking lever. The lever should close without resistance. Forcing the lever closed can damage the
processor and socket, requiring system board replacement.
Figure 15 Closing the processor socket retaining bracket
CAUTION: To allow heat sink to draw as much heat as possible from the processor base, there must
be good contact between the heat sink base and the top of the processor. To ensure good contact,
you must apply thermal interface material.
Removal and Replacement Procedures 38