How To Replace Battery - PROLUMIA ROCKDISC III Operating Instruction

OPTIONAL OUTPUT BRIGHTNESS
The fixture can be set at 3 different light levels.
The switch can be found on the LED driver and can be seen when you have removed the light unit.
ON Rockdisc III
3 choices of
output brightness
OPTIONAL COLOR TEMPERATURE
The fixture can be set at 2 different light colours.
The switch is located on the inside of the light unit and is accessible after opening the fixture.

HOW TO REPLACE BATTERY

1. Cut the power supply first.
2. Pull out the plug of battery from the emergency driver.
3. Screw out the plastic brackets.
4. Remove the old battery.
5. Fix the new battery with the plastic brackets.
6. Connect the plug onto the emergency driver.
7. Record the date of commissioning of the battery
REPLACING LED MODULE AND LED DRIVER
Please note: The LED driver in this fixture is not suitable for use without the presence of a load. Before working on the fixture,
cut off the mains power first.
Replaceable light source (LED only)
by a qualified technician.
16
1 2
I ON ON 100%
II ON - 65%
III - - 45%
Light unit
www.prolumia.com
Base
Replaceable LED driver
by a qualified technician.