Quick Start - Server ConserveWell CW-T Quick Start Manual

QUICK START

PRACTICE SAFETY.
WASH ALL PARTS PROPERLY BEFORE USE.
INSTALL UNIT
1
Select wall location or sturdy vertical surface for mounting.
Determine proper mounting hardware you will need to supply.
Locate mounting holes approximately 10-5/8" apart.
Key slot mounting brackets make removal easy.
2
INSERT WATER PANS
Fill each pan with approximately
3/4 quart of HOT water.
See page 5 for water temperatures.
Insert both pans of water into basin.
Pour water into pans only.
PLUG CORD INTO
3
POWER SOURCE
4
TURN UNIT ON
5
PRESS RESET TO START
countdown cycle.
Timer is factory programmed
for 2 hour cycles.
Page 2
YOU WILL NEED:
• Screwdriver
• Appropriate fasteners
See page 4.
YES
Proper water
levels in PANS
NO
Never pour water
directly into
BASIN
or