Advertisement
Quick Links
EN
HEADSET AND BEARING CUP PRESS
VAR thanks you for purchasing DR-03500 specially designed for headset cups and
pressed-in bottom brackets installation.
This press can be used with
bottom bracket mounting adaptors.
Please read this manual carefully before installation and use.
The set contains
- 1 headset and bearing cup press
- 2 tapered bushings
Recommendations
DR-03500 and it's different bushings and adaptors
be used and stored with care and stored avoiding shocks, falls and mistreatments.
Espace Eiffel - Lot D6
19 et 21, Avenue Gustave Ei el
28630 Gellainville - FRANCE
+33 2 37 33 37 10
contact@vartools.com
PE-13800-PF, PE-13800-BB30 and PE-13800-PF30
DR-03500
are precision tools that have to
1/4
Advertisement
Related Manuals for VAR DR-03500
Summary of Contents for VAR DR-03500
- Page 1 +33 2 37 33 37 10 contact@vartools.com DR-03500 HEADSET AND BEARING CUP PRESS VAR thanks you for purchasing DR-03500 specially designed for headset cups and pressed-in bottom brackets installation. PE-13800-PF, PE-13800-BB30 and PE-13800-PF30 This press can be used with bottom bracket mounting adaptors.
- Page 2 Using the headset press without the tapered bushings is here warmly recommended. Headset preliminary informations To determine the right headset to install, VAR DV-11600 calliper is an excellent partner. It allows to determine the SHIS code and the right cups dimensions to install on the frame.
- Page 3 If the press‘ axle rotates in the same time as the handles, hold it in position with a VAR DV-55500-17 open end 17mm wrench, you will find two flat sections at the axle’s base.
- Page 4 Headset illustration Pressed-in bottom bracket illustration...